The SLP74AVC2T45 is a 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. It features two data input-output ports(nA and nB), a direction control input(DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8V and 3.6V making the device suitable for translating between any of the low voltage nodes(0.8V, 1.2V, 1.5V, 1.8V, 2.5V and 3.3V). Pins nA and DIR are referenced to VCC(A) and pins nB are referenced to VCC(B).
The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down.
When either VCC(A) or VCC(B) are at GND level, both A and B are in the high-impedance OFF-state.
Wide supply voltage range:
VCC(A): 0.8V to 3.6V
VCC(B): 0.8V to 3.6V
I/Os are 3.6V Tolerant
IOFF circuitry provides partial Power-down mode operation
Maximum data rates:
300 Mbps (1.8V to 3.3V translation)
220 Mbps (<1.8V to 3.3V translation)
200 Mbps (translate to 2.5V or 1.8V)
150 Mbps (translate to 1.5V)
100 Mbps (translate to 1.2V)
ESD protection:
HBM Exceeds 8000V
CDM Exceeds 1000V
Latch-up performance exceeds 100mA
Specified from -40°C to +85°C and -40°C to +125°C
Product Name | Package form | Marking | Hazardous Substance Control | Packing Type | Remarks |
---|---|---|---|---|---|
SLP74AVC2T45JMTR | MSOP-8-185-0.65 | AC2T45 | Halogen free | Tape & Reel | |
SLP74AVC2T45JQTR | TSSOP-8N-150-0.65 | A2T45 | 无卤 | 编带 | |
SLP74AVC2T45JWTR | VSSOP-8-100-0.5 | 2T45 | Halogen Free | Tape & Reel |